Filter


Detailed filter
Publication type

Results: 238

12.09.2017

Reduction of SF6 Emissions from Switchgear and Controlgear

The ZVEI member companies are working intensively on the further reduction of SF6 emissions for all areas of application in energy transmission and distribution as well as on the research and…

10.09.2017

Explanations regarding the new F-gas Regulation (EU) 517/2014 relating to the use of SF6 in energy transmission and distribution

Following lengthy discussions and negotiations at the European level, the new Regulation (EU) No. 517/2014 of the European Parliament and of the Council dated 16 April 2014 on fluorinated greenhouse…

28.07.2017

Call Systems according to DIN VDE 0834

Notes on Planning, Installation, Operation and Maintenance of Nurse Call Systems according to DIN VDE 0834, e.g. in hospitals, residential homes for the elderly and senior citizens, care…

21.07.2017

Guideline Generic IC EMC Test Specification Version 2.1

This document defines common tests characterising the EMC behaviour of integrated circuits (ICs) in terms of RF emission and RF immunity in the frequency range from 150 kHz up to 3 GHz as well as…

30.06.2017

Industrie 4.0 Plug-and-Produce for Adaptable Factories: Example Use Case Definition, Models, and Implementation

The Platform Industrie 4.0 aims at identifying and evaluatingexisting standardsthat areneeded toimplement Industrie4.0 application scenarios across vendor borders. If the standards are not suited…

22.06.2017

A Responsible and Innovation-Friendly Approach to Building a European Data Economy

The German electrical and electronic manufacturers’ association supports the European Union’s proposal to build up a cross-European data economy. At the same time, ZVEI urges the need for a…

15.05.2017

The Replaceability of LED Light Sources

This leaflet is intended to set out technically feasible designs for the exchange or replaceability of LED light sources in LED luminaires. In order to be replaceable, only suitable LED modules or…

04.05.2017

Successful Ceramic Solutions - Basic technology for microelectronic systems

Reliability, high frequency, high currents, mechanical strength, pressure stability and biocompatibility are excellent properties of ceramic microcircuits. This is why they can be used especially…

20.04.2017

Consumer Devices in the Industrie 4.0 Environment

This document investigates the challenges and opportunities that arise as a result of the immense technological development of devices in the consumer area and that will be further strengthened with…

19.04.2017

Classification of Binary 24 V Interfaces - Functional Safety aspects covered by dynamic testing

This document describes characteristic features of binary 24V interfaces that use dynamic test pulses.   The purpose of this document is to describe terms and definitions; define…